Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Unable to render {include} The included page could not be found.

 SCHEMATIC EDITOR WORKFLOW

Introduction

This firmware includes:

  • One eHS x128 Gen5 Solver
  • One Analog Output Mapping and Rescaling (AOMR) module
  • One Analog Input Differential Rescaling (AIR) module
  • One Thermal Losses (TL) module
  • One Saturable Transformer (satXFO) module


LoadIn/DataIn/DataOut mapping


LoadIn

DataIn

DataOut

1

Config eHS

Inputs eHS

eHS Averaged

2

Scenario / Rst eHS = Status

TSDO 1 - eHS 0 to 7

eHS DownSample

3


TSDO 2 - eHS 8 to 15

Digital In 1A - 0 to 7

4

PWM 1A -  0 to 7

TSDO 3 - eHS 16 to 23

Digital In 1A - 8 to 15

5

PWM 1A -  8 to 15

TSDO 4 - eHS 24 to 31

Digital In 1A - 16 to 23

6

PWM 1A -  16 to 23

TSDO 5 - eHS 32 to 39

Digital In 1A - 24 to 31

7

PWM 1A -  24 to 31

TSDO 6 - eHS 40 to 47

Analog In 2A - 0 to 7

8


TSDO 7 - eHS 48 to 55

Analog In 2A - 8 to 15

9


TSDO 8 - eHS 56 to 63

eHS Period Averaged

10


TSDO 9 - eHS 64 to 71

eHS Period DownSample

11


Digital Out 1A - SDO 0 to 7

TimeOn Averaged

12

Config AOMR

Digital Out 1A - SDO 8 to 15

TimeOn DownSample

13

eHS PWM 1 - eHS 24 to 31

Digital Out 1A - SDO 16 to 23

Thermal Losses

14

eHS PWM 2 - eHS 0 to 7

Digital Out 1A - SDO 24 to 31


15

eHS PWM 3 - eHS 8 to 15



16

eHS PWM 4 - eHS 16 to 23



17

Config eHS AIR



18




19


AOMR/ Analog Out 1B -  0 to 7


20


Analog Out 1B -  8 to 15


21

Config Thermal Losses

Analog Out 2B -  0 to 7


22

SFP

Analog Out 2B -  8 to 15


23


eHS PWM 1 -  0 to 7


24


eHS PWM 2 -  8 to 15


25


eHS PWM 3 -  16 to 23


26


eHS PWM 4 -  24 to 31


27


eHS SWG


28




29


30




31


32


33
 Thermal Losses
34
SFP

System Overview


Unable to render {include} The included page could not be found.


eHS solver

SPS WORKFLOW SPECIFIC

Unable to render {include} The included page could not be found.

Connectivity

SPS WORKFLOW SPECIFIC

Source TypeSource IndexSource NameDetails
Input

0CPU Input
1eHS Analog InSlot 2A - Ch00-15
2Data stream from SFP #00
3Sine Wave Generator
4Saturbale Transformer


Gate0Digital InputSlot 1A - Ch00-31
1PWM
2CPU Gating SignalTSDO 0-32
3CPU Gating SignalTSDO 0-32

SPS WORKFLOW SPECIFIC

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

{'CPU Model',0,128;'Sine Wave Generator',3,32;'Analog In',1,16;'SFP',2,16;'Saturable Transformer',4,32}

And this custom gate sources enumeration:

{'CPU Model',2,32;'Digital Inputs',0,32;'PWM',1,32}

Unable to render {include} The included page could not be found.

Communication port configuration for the Thermal Losses (TL) block


Thermal Losses
Data In Port Number33
Load In Port Number21
Data Out Port Number13

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block


AOMR - Slot 1B/2B

VersionV2
Data In Port Number19
Load In Port Number12

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Input Differential Rescaling (AIR) block


AIR - Slot 2A

ChannelsCh00-15
Load In Port Number17

AOMR Output

Lane IndexSignal SourceDetails
0eHS OutputseHS Y01-128
1Data Stream from SFP #01

Unable to render {include} The included page could not be found.

Communication port configuration for the SFP mapping and communication block


SFP - Channel 0

Data In Port Number34
Load In Port Number22

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Input (AI) block


Slot 2A 

ChannelsCh00-07Ch08-15
Data Out Port Number78

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Output (AO) block


Slot 1B

Slot 2B

ChannelsCh00-07Ch08-15Ch00-07Ch08-15
Data In Port Number19202122

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Digital Input (DI) block


Slot 1A 

ChannelsCh00-07Ch08-15Ch16-23Ch24-31
Data Out Port Number3456

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Communication port configuration for the Digital Output (DO) block


Slot 1A 

ChannelsCh00-07Ch08-15Ch16-23Ch24-31
Data In Port Number11121314
Load In Port Number4567

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment





  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter