Supported Features

• Standard registers:
  • Coils
    
  • Discrete inputs
    
  • Input registers: The supported data types are UINT16, INT16, UINT32, INT32 and FLOAT32.
  • Holding registers: The supported data types are UINT16, INT16, UINT32, INT32 and FLOAT32.
• TCP and RTU modes
• Allows multiple slaves instantiation
• Configurable TCP port when operating over TCP mode
• Configurable serial port parameters when operating over RTU mode
• Supports reconnection with master device(s) if a connection is lost
• Supports triggered read/write for non-cyclic operations

Limitations

• Modbus ASCII is not supported
• A BlueStorm RS-485 card is needed in case it is required to communicate with multiple slaves on the same physical bus in RTU mode