Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Module Installation

  • Connect the DB37 cables provided with the Opal-RT simulator to the back connectors on the OP8210 Interface Connector.
  • Connect the external device to the desired channel connectors on the front of the Interface Connector.

Depending on the type of board used in the simulator, the OP8210 connector may require an external power supply (example: when using a digital output board).

Vuser Connector

  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323