Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP8210 Installation

Module Installation

  • Connect the DB37 cables provided with the Opal-RT simulator to the back connectors on the OP8210 Interface Connector.
  • Connect the external device to the desired channel connectors on the front of the Interface Connector.

Depending on the type of board used in the simulator, the OP8210 connector may require an external power supply (example: when using a digital output board).

Vuser Connector

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323