SCHEMATIC EDITOR WORKFLOW
Introduction
This firmware includes:
- One eHS x128 Gen4 Solver
- One Dual Permanent Magnet Synchronous Machines (PMSM-SH) model
- One Analog Output Mapping and Rescaling (AOMR) module
- One Analog Input Differential Rescaling (AIR) module
- One Thermal Losses (TL) module
- One Saturable Transformer (satXFO) module
LoadIn/DataIn/DataOut mapping
LoadIn | DataIn | DataOut | |
1 | Config eHS | Inputs eHS | eHS Averaged |
2 | Scenario / Rst eHS = Status | TSDO 1 - eHS 0 to 7 | eHS DownSample |
3 | TSDO 2 - eHS 8 to 15 | Digital In 1A - 0 to 7 | |
4 | PWM 1A - 0 to 7 | TSDO 3 - eHS 16 to 23 | Digital In 1A - 8 to 15 |
5 | PWM 1A - 8 to 15 | TSDO 4 - eHS 24 to 31 | Digital In 1A - 16 to 23 |
6 | PWM 1A - 16 to 23 | TSDO 5 - eHS 32 to 39 | Digital In 1A - 24 to 31 |
7 | PWM 1A - 24 to 31 | TSDO 6 - eHS 40 to 47 | Analog In 2A - 0 to 7 |
8 | TSDO 7 - eHS 48 to 55 | Analog In 2A - 8 to 15 | |
9 | TSDO 8 - eHS 56 to 63 | PMSM SH 1/2 | |
10 | TSDO 9 - eHS 64 to 71 | Encoder Input on RS422 | |
11 | Encoder Input on Digital In 1A | ||
12 | Config AOMR | Thermal Losses | |
13 | eHS PWM 1 - eHS 0 to 7 | ||
14 | eHS PWM 2 - eHS 8 to 15 | ||
15 | eHS PWM 3 - eHS 16 to 23 | Digital Out 1A - SDO 0 to 7 | |
16 | eHS PWM 4 - eHS 24 to 31 | Digital Out 1A - SDO 8 to 15 | |
17 | Config eHS AIR | Digital Out 1A - SDO 16 to 23 | |
18 | Config PMSM SH 1/2 | Digital Out 1A - SDO 24 to 31 | |
19 | Config Encoder Input on RS422 | AOMR/ Analog Out 1B - 0 to 7 | |
20 | Analog Out 1B - 8 to 15 | ||
21 | Config Encoder Input on Digital In 1A | Analog Out 2B - 0 to 7 | |
22 | Config Thermal Losses | Analog Out 2B - 8 to 15 | |
23 | Config Encoder Output on RS422 | eHS PWM 1 - 0 to 7 | |
24 | SFP | eHS PWM 2 - 8 to 15 | |
25 | eHS PWM 3 - 16 to 23 | ||
26 | eHS PWM 4 - 24 to 31 | ||
27 | eHS SWG | ||
28 | PMSM SH 1/2 | ||
29 | |||
30 | Thermal Losses | ||
31 | Encoder Output on RS422 | ||
32 | LEDs | ||
33 | SFP |
System Overview
Communication port configuration for the Dual PMSM (SH) block
| Dual PMSM Motors SH | |
Machine Label | PMSM 1 | PMSM 2 |
Data In Port Number | 28 | |
Load In Port Number | 18 | |
Data Out Port Number | 9 |
Connectivity (Input)
Analog In - Slot 2A - Ch00-01
Encoder Output
Digital Out - Slot 1B/ Slot 3B - RS422
Encoder 1 | Encoder 2 | |
---|---|---|
A | Ch00 | Ch04 |
B | Ch01 | Ch05 |
Z | Ch02 | Ch06 |
Communication port configuration for the Thermal Losses (TL) block
Thermal Losses | |
---|---|
Data In Port Number | 30 |
Load In Port Number | 22 |
Data Out Port Number | 12 |
Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block
AOMR - Slot 2B | |
---|---|
Version | V2 |
Data In Port Number | 19 |
Load In Port Number | 12 |
AOMR Output
Lane Index | Signal Source | Details |
---|---|---|
0 | eHS Outputs | eHS Y01-128 |
1 | PMSM SH 1/2 AnalogOut | /wiki/spaces/EFS/pages/22516360 |
Communication port configuration for the Analog Input Differential Rescaling (AIR) block
AIR - Slot 2A | |
---|---|
Channels | Ch00-15 |
Load In Port Number | 17 |
Communication port configuration for the SFP mapping and communication block
SFP - Channel 0 | |
---|---|
Data In Port Number | 33 |
Load In Port Number | 24 |
Communication port configuration for the Analog Input (AI) block
Slot 2A | ||
---|---|---|
Channels | Ch00-07 | Ch08-15 |
Data Out Port Number | 7 | 8 |
Connector Pin Assignment
Please refer to your hardware documentation
Communication port configuration for the Analog Output (AO) block
Slot 1B | Slot 2B | |||
---|---|---|---|---|
Channels | Ch00-07 | Ch08-15 | Ch00-07 | Ch08-15 |
Data In Port Number | 19 | 20 | 21 | 22 |
Connector Pin Assignment
Please refer to your hardware documentation
Communication port configuration for the Digital Input (DI) block
Slot 1A | ||||
---|---|---|---|---|
Channels | Ch00-07 | Ch08-15 | Ch16-23 | Ch24-31 |
Data Out Port Number | 3 | 4 | 5 | 6 |
Connector Pin Assignment
Please refer to your hardware documentation
Communication port configuration for the Digital Output (DO) block
Slot 1A | ||||
---|---|---|---|---|
Channels | Ch00-07 | Ch08-15 | Ch16-23 | Ch24-31 |
Data In Port Number | 15 | 16 | 17 | 18 |
Load In Port Number | 4 | 5 | 6 | 7 |
Connector Pin Assignment
Please refer to your hardware documentation
Communication port configuration for the Encoder Intput (ENC IN) block
Slot 3A - RS422 | |
---|---|
Nb of Encoder Signals | 2 |
Load In Port Number | 11 |
Data Out Port Number | 10 |
Connector Pin Assignment
Please refer to your hardware documentation
Communication port configuration for the Encoder Output (ENC OUT) block
Slot 3B - RS422 | |
---|---|
Nb of Encoder Signals | 2 |
Data In Port Number | 31 |
Load In Port Number | 23 |
Connector Pin Assignment
Please refer to your hardware documentation