HIL2GO-100 - eHS and Schematic Editor

The firmware delivered in this project contains an eHS solver that can be used with OPAL-RT Schematic Editor.

OPAL-RT Schematic Editor Documentation

The system delivered has a standard eHS OP4512 configuration. The firmware required is therefore already included in the Schematic Editor database by default.

The firmware can be selected directly from the Simulator Setup interface in the Schematic Editor.
To configure your hardware and firmware in the Schematic Editor for eHS simulation, please refer to the link below.

OPAL-RT Schematic Editor Documentation - Configuring a Setup for Your Simulation