The OP5342 module provides 16 differential analog input channels, sampled at up to 2 MS/s, for measuring input signals up to ±20 V.
For OP5600 and OP5700 chassis, the OP5342 is compatible only with recent I/O carriers versions (V3 or above), i.e. system part numbers: OP5640V3, OP5607V3, OP5707V3.
Main Features
16 analog input channels
16-bit resolution
Simultaneous sampling at 2 MS/s
Voltage range ±20V
Differential input impedance 1 MΩ
Factory-calibrated
Channel description
Each channel uses a 16-bit resolution analog-to-digital (ADC) converter. Each ADC can sample up to 2 MSPS, giving a total throughput of 32 MS/s, all channels being simultaneously sampled.
The figure below represents a simplified schematic of the input stage of the OP5342 module. The first filter removes excessive noise. The signal is then attenuated to bring the voltage within the range required by the ADC converter.
For each channel, the input to ground has 500kΩ input impedance and 1MΩ differential input impedance.
Voltage range
The default voltage range is ±20 V.
Calibration
The card is factory-calibrated to ensure accurate output values with a maximum of ±10mV absolute error on noise and offset.
To ensure the ±10mV precision, a warm-up time of 5mn is necessary.
For compatibility of this card, please consult the Software compatibility and Hardware compatibility tables.