PSS/E

Here an example of a YAML mapping file for the CSTCNT component which can be found in phasor05 RT-LAB example is presented.

In this example, the PSS/E block FACTS_DEVICE with its DYR component CSTCNT is mapped to a custom FMU named CSTCNT. The PSS/e parameters (M and J) are mapped to the block parameters as defined OpenModelica parameters.

Three aliases are defined:

Alias COMP is the component from the FACTS_DEVICE section of the RAW file.
Alias CSTCNT comes from the DYR file.
Alias BUS matches the connected BUS data from the RAW file.

version: 1.0.0

filters:
  main:
    COMP: FACTS_DEVICE

  sub:
    CSTCNT:
      - type: CSTCNT
        if: CSTCNT.FACTSNAME == COMP.uid.split("_")[-1]

    BUS:
      - type: BUS
        if: BUS.I == COMP.I

mappings:
  DB_COMP:
    - type: Subsystem
      if: '"CSTCNT" in ListSubAlias and len(ListSubAlias) == 2'
      block:
        name: f"facts_{COMP.uid}"
      parameters:
        fmuModelIdentifier: '"CSTCNT"'
        IB: CSTCNT.M
        T1: CSTCNT.J
        T2: CSTCNT.J_1
        T3: CSTCNT.J_2
        T4: CSTCNT.J_3
        K: CSTCNT.J_4
        Droop: CSTCNT.J_5
        Vmax: CSTCNT.J_6
        Vmin: CSTCNT.J_7
        ICMAX: CSTCNT.J_8
        ILMAX: CSTCNT.J_9
        Vcutout: CSTCNT.J_10
        Elimit: CSTCNT.J_11
        Xt: CSTCNT.J_12
        Acc: CSTCNT.J_13
        P_gen: COMP.PDES
        Q_gen: COMP.VSMX
        Qmax: COMP.SHMX
        Qmin: -COMP.SHMX
        SB: COMP.RMPCT
        Vt_abs: BUS.VM
        Vt_ang: BUS.VA
        ZSOURCE_RE: COMP.VTMN
        fn: fBase
      ports:
        bus0: f"bus_{BUS.I}"

PSSe parameters names and description¹

Modelica FMU parameters names

1: Model Library, PSS®E 35.3.0, July 2021

PowerFactory

Please refer to the phasor19 example in RT-LAB.

ePHASORSIM User Documentation

Examples

PSS/E

PowerFactory