Executive Summary

Status	RELEASED

Status	RELEASED
Release Date	May 18, 2023

Main features

New Induction Machine with Saturation	Different machine from the existing non staturating Induction Machine Support saturation Support frame selection Support temperature change in the phase resistance Support on the fly update of electrical parameters (LLs LLr Rs Rr)
Improve Drivers performances and stability	Focus on the stability of the simulation start
Support Single Switch in eHS Gen5	All Schematic Editor single switches are concerned
Support Back-EMF user defined profile in Schematic Editor Workflow	PMSM Constant dQ PMSM Variable dQ BLDC

Component	Version

Added an example model of a doubly-fed induction machine with saturation (EFS-6065)
Added an example model of a squirrel cage induction machine with saturation (EFS-6066)
Support of the PMSM VDQ machine in eHS Gen5 VC707 firmware
Malformed JSON resource files now return a API error "Error (139)" (EFSTT-1575)
Added licensing management for eHS Gen5 and PADE5 discretization method (EFS-6222 and EFS-6213)
Support new Induction Machine with Saturation (EFS-4797)
Support single switches in eHS Gen5 (EFS-4321)
Ability to use User Defined Back EMF profile for PMSM and BLDC in Schematic Editor (EFS-6015)
Added new eHS Gen5 demo model for LLC Converter with PFC (EFSTT-1520)
Renamed IO connections in Schematic Editor to match Hardware Slot and Channel identification (EFS-5886)
Ability to switch from eHS S-function driver to eHS OpalBoards driver in the simulink eHS Menu (EFSTT-1483)
Improve Installer/Uninstaller performances (EFS-5723)

Fix an issue when connecting a measurement to multiple AO from different mezzanines (EFSTT-1570)
Improved reset logic of the eHS to fix initial state at model startup (EFS-6131)
Fix clean up of remanent conections for protected mode in the Schematic Editor Workflow (RTLABTT-3947)
Fixed an issue when disconnecting some, but not all, gate connections from Schematic Editor multi-level switching components (Half Bridge, Three-Level, Cyloconverter) (EFSTT-1543)
Fix evaluation of Gs expression with variables in Gen4 SPS workflow (EFSTT-1501)
Fix Thyristor behavior in eHS Gen4 (EFSTT-1493)
Fix to support rectangular Ldq matrices in PMSM VdQ in Schematic Editor workflow (EFSTT-1546)
PMSM Variable DQ parameters file may contain different number of values along the direct and the quadrature axes (EFSTT-1546)