Documentation Home Page eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Initialization Bus Data ID filter - efsXsgInitDataIdFilter

Block


Table of Contents

Description

This block filters the output data stream based on a given Data ID allowing the Valid signal only when the Data ID set in the mask matches signal's Data ID.


Mask Parameters

Data ID: This parameter sets the Data ID value to be filtered.


Inputs

Init_data_in: The decoded data stream from the address filter's output signal should be connected to this port.


Outputs

Data: The filtered data is outputted through this port.


Characteristics and limitations

Direct FeedthroughNO
Discrete sample timeYES
XHP supportN/A
Work offlineYES


If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter