Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OP5969-2 Optical Fiber I/O Module
The OP5969-2 is an optional optical fiber I/O module that can be installed on some simulators and FPGA processor and I/O expansion unit.
Request it specifically when ordering your unit; otherwise, the OP5969-1 RS-422 I/O Module will be installed by default.
The optical fiber I/O module connects to the rear interface of the simulator and provides six optical fiber connector pairs (input and output).
Six (6) optical fiber inputs and six (6) optical fiber outputs can be used for digital I/Os or for low-speed communication protocols.
The ORION protocol, developed by OPAL-RT, is compatible with these channels and available in custom bitstreams.
General Pin Assignments
OP5969-2 pin name | Signal name | |
RX XX | Channel XX Receiver | |
TX XX | Channel XX Transmitter |
Specifications
Number of channels | 6 transmitters, 6 receivers | |
|---|---|---|
Receiver Type | AFBR-2624Z PIN diode | |
Transmitter Type | AFBR-1624Z 650 nm wavelength | |
Connector Type | Avago’s Versatile Link family | |
Compatible Fiber Type | Plastic Optical Fiber (POF), 650 nm | |
Maximum Tx/Rx Frequency | DC - 25 MHz | |
Baud Rate | 50 Mbps | |
Minimum Tx Pulse Width | 20 ns | |
Maximum Distance | 50 meters |