C-API | OP_EVENTS

Use these enum to register an event with the OpalSetNotificationCallback function. When one of the following events is detected, a notification is sent to all registered API.

Use values greater than OP_USER_BASE_EVENTS(1024) to define your own events.

see Elements

• OP_SYSTEM_PRINT (0): OpalPrint has been called on target.
• OP_SYSTEM_PAUSE (1): The model is paused.
• OP_SYSTEM_CONTINUE (2): The model is executed.
• OP_SYSTEM_TRIM (3): The model is trimming.
• OP_SYSTEM_RESET (4): The model is reset.
• OP_SYSTEM_STOP (5): The model stopped by itself normally.
• OP_SYSTEM_DISCONNECT (6): The model is disconnected (connection with target has been lost)
• OP_SYSTEM_ERROR (7): The model stopped by itself with errors.
• OP_SYSTEM_MESSAGE (8): A system message is available.
• OP_SYSTEM_OVERRUN (9): An overrun occur on target.
• OP_SYSTEM_INTERRUPTS_ON (10): XHP is disabled.
• OP_SYSTEM_INTERRUPTS_OFF (11): XHP is enabled.
• OP_SYSTEM_CONTROL_LOST (12): System control has been lost (it should have been taken before).
• OP_SYSTEM_CONTROL_TAKEN (13): System control has been taken by another API.
• OP_SYSTEM_CONTROL_AVAIL (14): System control has been released by another API.
• OP_PARAMETER_UPDATE (15): Some parameters have been modified on target.
• OP_PARAMETER_CONTROL_LOST (16): Parameter control has been lost (it should have been taken before).
• OP_PARAMETER_CONTROL_TAKEN (17): Parameter control has been taken by another API.
• OP_PARAMETER_CONTROL_AVAIL (18): Parameter control has been released by another API.
• OP_SNAPHOT_TAKE (19): A snapshot has been taken.
• OP_SNAPSHOT_RESTORE (20): A snapshot has been restored.
• OP_SNAPSHOT_CONTROL_LOST (21): Snapshot control has been lost (it should have been taken before).
• OP_SNAPSHOT_CONTROL_TAKEN (22): Snapshot control has been taken by another API.
• OP_SNAPSHOT_CONTROL_AVAIL (23): Snapshot control has been released by another API.
• OP_SIGNAL_CHANGE (24): A control signal has been sent to the target.
• OP_SIGNAL_CONTROL_LOST (25): Signal control has been lost (it should have been taken before).
• OP_SIGNAL_CONTROL_TAKEN (26): Signal control has been taken by another API.
• OP_SIGNAL_CONTROL_AVAIL (27): Signal control has been released by another API.
• OP_ACQGR_CONTROL_LOST (28): Acquisition control has been lost (it should have been taken before).
• OP_ACQGR_CONTROL_TAKEN (29): Acquisition control has been taken by another API.
• OP_ACQGR_CONTROL_AVAIL (30): Acquisition control has been released by another API.
• OP_BLOB_CONTROL_LOST (31): Blob control has been lost (it should have been taken before).
• OP_BLOB_CONTROL_TAKEN (32): Blob control has been taken by another API.
• OP_BLOB_CONTROL_AVAIL (33): Blob control has been released by another API.
• OP_MONITORING_CONTROL_LOST (34): Monitoring control has been lost (it should have been taken before).
• OP_MONITORING_CONTROL_TAKEN (35): Monitoring control has been taken by another API.
• OP_MONITORING_CONTROL_AVAIL (36): Monitoring control has been released by another API.
• OP_CONFIG_CONTROL_LOST (37): Configuration control has been lost (it should have been taken before).
• OP_CONFIG_CONTROL_TAKEN (38): Configuration control has been taken by another API.
• OP_CONFIG_CONTROL_AVAIL (39): Configuration control has been released by another API.
• OP_DYN_ACQ_LIST_UPDATE (42): List of dynamic acquisition has been updated.
• OP_ALL_EVENTS: Always the last item, may vary.
• OP_USER_BASE_EVENTS: 1024, base event number for user notification.