Block

Mask

Description

Parameters

Channel Number: This parameter specifies the channel number depending on the selected card:

• 1 to 10 for the 50-295-021-10/8.
• 1 to 5 for the 50-295-021-5/16.
• 1 to 6 for the 50-295-121-6/24.

The resistance provided in the input 'Resistance' of the block is set between the two pins of the selected channel.

Please read the document 50-295M.pdf for the pinout.

PCI index: This parameter specifies the PCI index of the Pickering card in use, with the count starting at 0. It is used to differentiate among multiple cards present in one simulator.

Inputs

Resistance: This input is used to set the desired resistance of the channel. The resistance value should be in the range of 0 to the maximum that represents the resistance in Ohms: 255 for the 10/8, 65535 for the 5/16 and 16777215 for the 6/24.

Outputs

Error: This output represents the status of the block.

The following error codes may be returned:

Characteristics and Limitations

Pinout and further details:

Please read the 50-295D.pdf and 50-295M.pdf documentation given with your system from Pickering.

Only one 50-295 Pickering card is supported per block.