Description

This block is used to map multiple digital sources to one digital output.

Parameters

Controller Name: This parameter should match the corresponding controller name of the OpCtrl.

LoadIn Port Number: This parameter should be the one that get be found in the firmware documentation to configure the LoadIn port of the feature.

Sampling Time: This value should match the sampling time of the CPU model.

Invert Polarity: This parameter allows to invert the logic of the signal to make it active high or active low.

Source Lane: This value allows to configure one of the 8 source to be mapped to the digital output.

Signal Index: This value allows to configure one of the 32 signals from the respective source lane.

Inputs

This block has no parameter.

Outputs

This block has no parameter.

Characteristics and limitations

If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.