OP4512 Certification and Standards

This product meets the essential requirements of applicable European Directives as follows:

The essential requirements of the directive 2014/30/EU are covered by the following harmonized standards:
EN61326-1 (2013) – Electrical equipment for measurement, control and laboratory use. The immunity test requirements used for this Product qualification are for the equipment intended to be used in an industrial electromagnetic environment.

Certifying Body	Standard Number	Standard Name	Specifications	Minimum performance requirement criteria

Standard Number	Standard Name	Specifications	Minimum performance requirement criteria
FCC part 15 (2022), subpart B	Conducted Emissions	Class A 150 kHz-30MHz
FCC part 15 (2022), subpart B	Radiated Emissions	Class A 30 MHz-21GHz
ICES-001 Issue 5 (2020)	Radiated Emissions	CSA CISPR 11:19 Group 1 - class A 30 MHz-1GHz
ICES-001 Issue 5 (2020)	Conducted Emissions	CSA CISPR 11:19 Group 1 - class A 150 kHz-30MHz
IEC61000-4-2 (2008)	Electrostatic Discharge Immunity	Contact: ±4 KV Air: ±2kV, ±4kV, ±8 KV	B
IEC61000-4-3 (2020)	Radiated Electromagnetic Field Immunity	80 MHz-1000MHz: 10 V/m 1.4 GHz-6 GHz: 3 V/m	A
IEC61000-4-4 (2012)	Electrical Fast Transient Immunity	Power: ±2 KV/ 5 kHz & 100 kHz I/ O Ports: ±1 KV/ 5 kHz & 100 kHz Communication Ports: ±2 KV/ 5 kHz & 100 kHz	B
IEC61000-4-5 (2014) A1 (2017)	Surge Immunity	Power: ±2 KV L-PE, ±1 KV L-L I/O Ports: N/A Communication Ports: N/A	B
IEC61000-4-6 (2013)	Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields	Power: 3 V I/O Ports: 3 V Communication Ports: 3 V	A
IEC61000-4-8 (2009)	Power Frequency Magnetic Field Immunity	Continuous Field: 30A/m, 50 Hz & 60 Hz	A
IEC61000-4-11 (2020)	Voltage Dips, Short Interruptions and Voltage Variation Immunity on AC Input	Voltage dips: 0%Un during 1 cycle 40%Un during 10 cycles (at 50 Hz) 40%Un during 12 cycles (at 60 Hz) 70%Un during 25 cycles (at 50 Hz) 70%Un during 30 cycles (at 60 Hz) Short interruptions: 0%Un during 250 cycles (at 50 Hz) 0%Un during 300 cycles (at 60 Hz)	B C C C C C C
IEC61010-1:2010, IEC 61010-1:2010/AMD1:2016	Single fault condition Protective Conductor Abnormal Cooling Abnormal Input Durability Of Markings Applied Force Permissible Limits For Accessible Parts Impedance Of Protective Bonding Test Dielectric Voltage Withstand Humidity Conditioning Capacitor Discharge Stability 10 Deg 7.5.2 Handle Strength Test 7.6 Rack Mounting Test Static Rigidity Impact Drop (Non-Hand Held Equipment) Temperature	4.4.1 4.4.2.3 4.4.2.10 5.1.3 c 5.3 6.2.2 6.3 6.5.2.4 6.8 6.8.2 6.10.3 7.4 7.5.2 7.6 8.2.1 8.2.2 8.3.1 10.1