Block
Table of Contents
Description
This block sends the first 16 data of FLWS bus to a generic high speed communication block,reads back data received at the same port, and sends them as an FLWS bus to eHS core as external input.
Mask Parameters
Channel Number Selection: Use this parameter to select the communication channel number. The default value is zero.
Inputs
fromEhs: This input should be connected to the eHS low latency outputs and it only uses first 32 MSB bits.
Outputs
toEhs: This output is connected to eHS core as external input and it is composed of Xfloat8_34 signals.
Characteristics and limitations
This block has no special characteristics or limitations.
| Direct Feedthrough | N/A |
| Discrete sample time | N/A |
| XHP support | N/A |
| Work offline | N/A |
If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.