Description

This block implements a signal mapping and rescaling interface to control analog output channels according to signals originating from the RT-XSG (FPGA) or RT-LAB (CPU) model. The signal mapping as well as the gain, offset, min and max are configured from the RT-LAB model or the Schematic Editor.

This block is capable to map from up to eight serial input in the OPAL-RT FLWS Protocol format to 32 analog output channels.

Inputs

Sync_AOut: This input must be a Bool or UFix1_0 signal. It should be a pulse train whose period is equal to the sample time requested for the Analog Output channels. Refer to the Hardware documentation for the minimum sampling time of the interface.

Model Signal Serial {1..8}: These inputs are providing the FPGA signals that could be mapped to the analog output channels. They have to follow the OPAL-RT FLWS Protocol. Inner data size is 32 bits (i.e XFloat8_24), any additional bit would be discarded. Each input can transport a maximum of 128 channels. As an example, this signal could be provided by eHS solver. (Gen4 onwards).

Configuration: This input should be a bus containing all the solver parameters. It should be connected to an "Analog Output Mapping and Rescaling Unpacking" block.

Outputs

Conv1: This output is conversion command that should be connected to the first Analog Output I/O interface.

ch{0..15}: These outputs are the 16 mapped and rescaled channels that should be connected to the first Analog Output I/O interface. The output format is Fix16_11.

Conv2: This output is conversion command that should be connected to the second Analog Output I/O interface.

ch{16..31}: These outputs are the 16 mapped and rescaled channels that should be connected to the second Analog Output I/O interface. The output format is Fix16_11.

Characteristics and limitations

The use of this block is limited to analog output interfaces that accept the Fix16_11 fixed-point format for their inputs. And be aware AOMR block ID is no longer used in this block.

If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.