Block
Table of Contents
Description
This block filters the output data stream based on a given Address allowing the Valid signal only when the Address set in the mask matches signal's Address.
Mask Parameters
Address: This parameter sets the Address value to be filtered.
Inputs
Init_data_in: The decoded data stream from the Param ID filter's output signal should be connected to this port.
Outputs
Init_data_out: The filtered data stream is outputted through this port. It has the following signal form: Data, Valid, DataID and Reset
Characteristics and limitations
| Direct Feedthrough | YES |
| Discrete sample time | YES |
| XHP support | N/A |
| Work offline | YES |
If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.