CMDE Add-on 1.0.1

Release Date

Jan 20, 2025

What’s New

• Fixed CMDETT-96: Sleep bit not getting properly activated for the ADBMS6830.

• Fixed CMDETT-56: Timing issue present at all hardware configurations between the emulated devices and DIOs, leading to SPI communication problems in hybrid setups (Real devices and emulated devices in the same ring).

• Fixed CMDETT-71: LTC6810, LTC6811 and LTC6813 use two’s compliments representation for voltage measurements for simulations, which differs from the actual behavior of the real devices.

• Fixed CMDETT-47: SPI modes 1 and 2 for the ADBMS6815 and ADBMS6830 are inverted (to use mode 1, user should select mode 2, and to use mode 2 user should select mode 1).

• Fixed CMDETT-26: When sending a register read command from SPI Master A to the LTC6811 or LTC6813, if the hex value of the first register after the command bits is greater than 0x7, a bit will be carried over to the command portion. This does not interfere with the registers' results.

Upgrade Process

To migrate a VeriStand project to the latest version of the Cell Monitoring Device Emulation Add-On, please refer to the Project Migration Procedure.

NI Packages

This release installs the following NI Packages:

• OPAL-RT Cell Monitoring Device Emulation 1.0.1

• OPAL-RT Hardware Configuration Manager 3.0.1

• OPAL-RT License Manager 2.7.0