Page Content

Have a question or need help?

RT-LAB Setup Schematic

NI VeriStand Setup Schematic

With RT-LAB, an external gateway is required to convert CAN bus to LIN.
An OP3411 CAN bus kit is required as well.

Contact us for more information on this solution.

Type	Description	Product Number(s)	Supported Simulators
Type	Description	Product Number(s)	OP4510v2 OP4512 OP4610XG	OP5033XG	OP5600v2 OP5650	OP5700 OP5705XG OP5707XG
Driver	Driver license for CAN for RT-LAB real-time simulation models, 4 channels. Supports CAN-FD, high-speed CAN, 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers, galvanically isolated. One driver license is required for each add-on module installed.	OP3414	YES	YES	YES	YES
Add-on module	CAN bus Interface Kit, KVASER PCIe CAN 4 channels for *OP451x Series License OP3414 is required**	OP3411-4510	OP4510v2 OP4512
Add-on module	CAN bus Interface Kit, KVASER PCIe CAN 2 channels for *OP451x Series License OP3414 is required**	OP3411-451x-2CH	OP4510v2 OP4512
Add-on module	CAN bus Interface Kit, KVASER PCIe CAN 4 channels for *OP451x Series License OP3414 is required**	OP3411-4610-4CH	OP4610XG
Add-on module	CAN bus Interface Kit, KVASER PCIe CAN 4 channels for *OP451x Series License OP3414 is required**	OP3411-5600			YES
Add-on module	CAN bus Interface Kit, KVASER PCIe CAN 4 channels for OP57xx, Series and, OP503x Series*	OP3411-5707		YES		YES
External Hardware	CAN to LIN gateway. Requires an OP3411 kit installed (see above). Contact OPAL-RT for more information.	IXXAT FRC-EP170 or IXXAT FRC-EP190	YES	YES	YES	YES

* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.

When using NI PXIe hardware, the PXIe8510 module supporting 2 to 6 ports is required along with VeriStand.

Type	Description	Product Number

Type	Description	Product Number
PXIe Module	2 or 6 port multiprotocol interface module	PXIe8510 (784122-01 or 784121-01)
Software	NI VeriStand Full Development System	780590-35