Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

ScopeView Functions | Harmonic Analysis

Function

Description

Function

Description

Harmonic Analysis | FFREQ

Outputs the fundamental frequency of selected signal.

Harmonic Analysis | FFREQS

Outputs the fundamental frequency of selected signal evaluated at each data points.

Harmonic Analysis | FFT

Outputs the magnitude and the angle for the Fourier series coefficients of selected signal.

Harmonic Analysis | HARM

Outputs the module and phase of all selected harmonics over the entire signal.

Harmonic Analysis | HMOD

Outputs the module of the selected harmonic over time.

Harmonic Analysis | HPHA

Outputs the module of the selected harmonic over time.

Harmonic Analysis | SYHMOD

Extract the magnitude of the phasor component from the three input signal.

Harmonic Analysis | SYHPHA

Extract the phase of the phasor component from the three input signal.

Harmonic Analysis | THD

Output the total harmonic distortion of the input signal.

Harmonic Analysis | ZSEQ

Compute the sequence impedance matrix in function of the phase impedance matrix. The input and output are represented by phasors.

 

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter