Acquisition is started exactly at the same time as the trigger condition (without time offset) and the acquisition time length is 0.1 second. Sampling time of the last data is then 0.1 second.

Time acquisition length you want to visualize in scopeview

Number of data per sample. It reduces the number of data points sent from the simulation to ScopeView

Number of acquisition displayed one after the other by Scoepview

Synchronize data acquisition and timed operations such as with programmable voltage sources or breakers based on the Point of wave (POW) block conditions. By default, it is based on phase A at the bus where the POW is connected as a reference signal.

Enabe the sequence of events such as faults and breakers activation.

Continous Option allows to display the results on the screen during acquisition. It is used when the time range of the scope is large.

Example: You look at a windows of 20 seconds. By enabling Cont, you can view the results continuously, instead of waiting the end of the frame.

NEW TEMPLATE

Clears the graphic page area to let you create your own new template.

OPEN TEMPLATE

Allows the opening of a template used with another simulation session. Template files have.xml or.mod extension. The name of the template file appears at the top of the main window.

SAVE TEMPLATE

Saves a study set-up in a file for future use as a template or to help in setting up a new study in your current directory. The template is saved under ScopeView\templates\...

SAVE TEMPLATE AS...

Saves a study set-up in a file for future use as a template or to help in setting up a new study in the directory of your choice.

DELETE TEMPLATE

Erase a template from your work station

EXPORT...

Used to transfer a result file in a different format to be used with simulation software or in a convenient format for visualization or printing purposes.

Available formats are:

• Comtrade (*.cfg)

• Encapsulated PostScript (EPS) (*.eps);

• Joint Photographic Expert Group (*.jpg)

• MATLAB Binary (*.mat);

• Portable Document Format (PDF) (*.pdf);

• Portable Network Graphic (*.png);

• PostScript (PS) (*.ps);

• Text (tab separator) (*.txt).

Print the actual window (results) displayed on screen. Select one of the printers installed.

Displays the actual graphical page area (results) before printing.

Quits and closes ScopeView.

CUT

Select a graph from the main window and click this function to remove the graph from the graphic page area and put it on the clipboard.

COPY

Select the graph you want and click this function to copy the graph on the clipboard. The selected graph remains on the graphic page area.

PASTE

This function displays the content of the clipboard on the actual graphic page area.

PASTE ON A NEW PAGE

A variant from the Paste option. This function creates a new page and displays the content of the clipboard.

DELETE

Removes the selected graph from graphic page area displayed.

SELECT ALL

Select all graphs displayed on the graphic page area.
Another way to select all graphs: CTRL + A

SELECT NONE

Deselect all the graphs previously selected.

TOOLBAR

Shows or hides menus from the Toolbar.

CANVAS FOOTER

Allows showing or hiding the Edit Graph buttons at the lower left-hand side of the ScopeView window.

ACQUISITION PARAMETERS...

Allows selecting the starting time, sampling time length (duration) and, number of acquisitions to execute.
Synchronization (when ticked) specifies if a synchronization signal should be used during data acquisition2.

SHOW GRID

Displays grid on all graphs on the graphic page area.

SHOW SELECTED GRAPHS ONLY

Select the graph(s) you want to display and click this option.
If you select, for example, only one graph, the later occupies the complete area of the graphic page area.
Unselected graphs are hidden, not deleted.

SHOW ALL GRAPHS

Displays all the graphs including the ones previously hidden.

Zoom out last level

Zoom out last level X

Zoom out last level Y

Zoom out last level XY

Zoom out all levels X

Zoom out all levels Y

Zoom out all levels

SUPERIMPOSED

ScopeView displays two or more traces in the same graph (depending on how many signals you have selected).

UNDO SUPERIMPOSED

ScopeView displays one signal per graph.

CURSOR

ScopeView displays a Region cursor and a corresponding table. This type of cursor selects an area of interest of a graph and displays the coordinates and other information as per the table below.
To activate this feature, select the Cursor item; click your mouse at the beginning of the area you want, then at the other end of the same area.