Network Data

The Network data tab links the data files with the ePHASORSIM solver.

The input files and the Simulink model should be saved in one single folder matching the MATLAB current working directory.

The name of the .opal files that are created and transferred to the target is based on the name of the Excel file (.xlsx file name).
Any change in the input files content or in the mask are applied when the network data is converted to .opal format.

Network data tab

Name	This field allows user to specify a unique name for each solver when more than one exists in a Simulink model.
Input file format	The user can choose between Excel, PSS/E, CYME and PowerFactory input file formats. Different configurations get activated in the mask depending on this selection. Refer to Running an ePHASORSIM Simulation for Excel Template configuration Third-Party Network Imports for the third-party inputs configuration
*Complete network or I/O pins v2.0 file (.xlsx)**	This is a common field used to configure the network data and incoming/outgoing pins for the Solver block. User can select the file directly using the Select button or open the file specified in this field using the Open button.
Refresh netlist only when the simulation starts	Large networks may be lengthy to read and parse. This option delays the conversion process until the simulation starts. When unchecked, the conversion is done when OK is clicked instead. This field is common to all input formats.