Licenses

To run ePHASORSIM, both host and target computers need to have appropriate licenses installed.

Licence Key	Feature

Licence Key	Feature
`EPHASOR_RT`	Enables ePHASORSIM on a real-time target.
`EPHASOR_NRT`	Enables ePHASORSIM offline (on Windows host).
`EPHASOR_NUM_POWERSYSTEM_NODES`	Maximum size of a power system (in number of nodes) that can be simulated by ePHASORSIM.
`EPHASOR_INPUTFORMAT_PSSE`	Enables ePHASORSIM’s PSS/e data file input feature.
`EPHASOR_INPUTFORMAT_CYME`	Enables ePHASORSIM’s CYME data file input feature.
`EPHASOR_INPUTFORMAT_POWERFACTORY`	Enables ePHASORSIM’s PowerFactory data file input feature.
`EPHASOR_FEATURE_POWERFLOW`	Enables power-flow computation on the host (Even though the target uses the results of the power-flow, the target’s license doesn’t contain this key)
`EPHASOR_PYTHON_API`	Enables ePHASORSIM’s Python API feature.
Parallel Processing
`EPHASOR_NUM_CORES`	Maximum number of cores that can be used for simulation on a Linux target. (If this key is set to a number strictly higher than 1, `EPHASOR_PARALLELIZE_GENUNITS` is enabled.)
`EPHASOR_PARALLELIZE_GENUNITS`	Enables parallel computation for generator units in the embedded library and FMUs (machines and their controllers). (If this key is set, `EPHASOR_NUM_CORES` is set to a number strictly higher than 1)
`EPHASOR_PARTITION_POWERSYSTEM`	Enables partitioning of the power system: when the power system is partitioned, the network’s nodal equations are computed in parallel. (If this key is enabled, `EPHASOR_PARALLELIZE_GENUNITS` is enabled as well.)
FMU Creation
`EPHASOR_DYMOLA_FMU`	Enables FMUCreator to use Dymola as a tool to build FMUs compatible with ePHASORSIM. This key is required only for FMUCreator and not for running the pre-build FMUs. No license is required for OpenModelica FMU.