OPAL-RT TECHNOLOGIES
1751 Richardson suite 1060, Montréal QC Canada H3K 1G6
www.opal-rt.com

Legend

SPS WORKFLOWSCHEMATIC EDITOR WORKFLOW

Introduction

This firmware includes:

One eHS x128 Gen5 Solver
One Analog Output Mapping and Rescaling (AOMR) module
One Analog Input Differential Rescaling (AIR) module
One Thermal Losses (TL) module
One Saturable Transformer (satXFO) module

LoadIn/DataIn/DataOut mapping

	LoadIn	DataIn	DataOut
1	Config eHS	Inputs eHS	eHS Averaged
2	Scenario / Rst eHS = Status	TSDO 1 - eHS 0 to 7	eHS DownSample
3		TSDO 2 - eHS 8 to 15	Digital In 1A - 0 to 7
4	PWM 1A - 0 to 7	TSDO 3 - eHS 16 to 23	Digital In 1A - 8 to 15
5	PWM 1A - 8 to 15	TSDO 4 - eHS 24 to 31	Digital In 1A - 16 to 23
6	PWM 1A - 16 to 23	TSDO 5 - eHS 32 to 39	Digital In 1A - 24 to 31
7	PWM 1A - 24 to 31	TSDO 6 - eHS 40 to 47	Analog In 2A - 0 to 7
8		TSDO 7 - eHS 48 to 55	Analog In 2A - 8 to 15
9		TSDO 8 - eHS 56 to 63	eHS Period Averaged
10		TSDO 9 - eHS 64 to 71	eHS Period DownSample
11		Digital Out 1A - SDO 0 to 7	TimeOn Averaged
12	Config AOMR	Digital Out 1A - SDO 8 to 15	TimeOn DownSample
13	eHS PWM 1 - eHS 24 to 31	Digital Out 1A - SDO 16 to 23	Thermal Losses
14	eHS PWM 2 - eHS 0 to 7	Digital Out 1A - SDO 24 to 31
15	eHS PWM 3 - eHS 8 to 15
16	eHS PWM 4 - eHS 16 to 23
17	Config eHS AIR
18
19		AOMR/ Analog Out 1B - 0 to 7
20		Analog Out 1B - 8 to 15
21	Config Thermal Losses	Analog Out 2B - 0 to 7
22	SFP	Analog Out 2B - 8 to 15
23	Lookup Table Config	eHS PWM 1 - 0 to 7
24		eHS PWM 2 - 8 to 15
25		eHS PWM 3 - 16 to 23
26		eHS PWM 4 - 24 to 31
27		eHS SWG
28
29
30
31
32
33		Thermal Losses
34		SFP

System Overview

Extensive I/O compatibility (Polymorphism)

Listed cards are compatible at the same location

Digital In/Out Mezzanine
Compatible Mezzanine Modules
OP5369

Analog Out Mezzanine
Compatible Mezzanine Modules
OP5330-3 16 Aout
OP5330-1 16 Aout

Analog In Mezzanine
Compatible Mezzanine Modules
OP5340-1 16 Ain
OP5340-2 16 Ain

Expansion Mezzanine
Compatible Mezzanine Modules
OP5969-1 DIN/DOUT RS422 5V
OP5969-2 DIN/DOUT FIBER OPTIC

eHS solver

SPS WORKFLOW SPECIFIC

Connectivity

SPS WORKFLOW SPECIFIC

Source Type	Source Index	Source Name	Details
Input	0	CPU Input
	1	eHS Analog In	Slot 2A - Ch00-15
	2	Data stream from SFP #00
	3	Sine Wave Generator
Gate	0	Digital Input	Slot 1A - Ch00-31
	1	PWM
	2	CPU Gating Signal	TSDO 0-32

SPS WORKFLOW SPECIFIC

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

{'CPU Model',0,128;'Sine Wave Generator',3,32;'Analog In',1,16;'SFP',2,32}

And this custom gate sources enumeration:

{'CPU Model',2,32;'Digital Inputs',0,32;'PWM',1,32}

Thermal Losses module (TL)

SPS WORKFLOW SPECIFIC

There is one Thermal Losses tab in the eHS CPU block allowing to configure all four thermal models.

SPS Workflow - Thermal Losses (TL) block

Communication port configuration for the Thermal Losses (TL) block

	Thermal Losses
Data In Port Number	33
Load In Port Number	21
Data Out Port Number	13

Analog Output Mapping and Rescaling module (AOMR)

AUTOMATIC AND NOT VISIBLE IN SCHEMATIC EDITOR WORKFLOW

There is one AOMR block allowing to configure all 32 analog outputs.

AOMR Master Subsystem (SM) block

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

	AOMR - Slot 1B/2B
Version	V2
Data In Port Number	19
Load In Port Number	12

Analog Input Differential Rescaling module (AIR)

AUTOMATIC AND NOT VISIBLE IN SCHEMATIC EDITOR WORKFLOW

AIR block configures analog inputs for eHS.

AIR block

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

	AIR - Slot 2A
Channels	Ch00-15
Load In Port Number	17

AOMR Output

Lane Index	Signal Source	Details
0	eHS Outputs	eHS Y01-128
1	Data Stream from SFP #01

SFP Mapping and Communication Block

A total of 32 inputs and 32 outputs are available and configured using the SFP mapping and communication block.

Schematic Editor Workflow - SFP Mapping and Communication block

Communication port configuration for the SFP mapping and communication block

	SFP - Channel 0
Data In Port Number	34
Load In Port Number	22

Analog In module (AI)

AI block reads signals from analog input channels on the simulator.

SPS Workflow - AI block

Schematic Editor Workflow - OPAL-Board/AI

RT-LAB

HYPERSIM

Communication port configuration for the Analog Input (AI) block

	Slot 2A
Channels	Ch00-07	Ch08-15
Data Out Port Number	7	8

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Analog Out module (AO)

AO block configures analog output channels on the simulator.

SPS Workflow - AO block

Schematic Editor Workflow - OPAL-Board/AO

RT-LAB

HYPERSIM

Communication port configuration for the Analog Output (AO) block

	Slot 1B		Slot 2B
Channels	Ch00-07	Ch08-15	Ch00-07	Ch08-15
Data In Port Number	19	20	21	22

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Digital In module (DI)

DI block reads signals from digital input channels on the simulator. It could be static, TSDI or PWMIn.

SPS Workflow - DI block

Schematic Editor Workflow - OPAL-Board/DI

RT-LAB

HYPERSIM

Communication port configuration for the Digital Input (DI) block

	Slot 1A
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data Out Port Number	3	4	5	6

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Digital Out module (DO)

DO block configures digital output channels on the simulator. It could be static, TSDO or PWMOut.

SPS Workflow - DO block

Schematic Editor Workflow - OPAL-Board/DO

RT-LAB

HYPERSIM

Communication port configuration for the Digital Output (DO) block

	Slot 1A
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data In Port Number	11	12	13	14
Load In Port Number	4	5	6	7

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

V2.12 Kintex-7 410T - eHS x128 - Gen5 - IO Config2

Legend

Introduction

System Overview

Extensive I/O compatibility (Polymorphism)

eHS solver

SPS WORKFLOW SPECIFIC

Connectivity

SPS WORKFLOW SPECIFIC

SPS WORKFLOW SPECIFIC

Thermal Losses module (TL)

SPS WORKFLOW SPECIFIC

SPS Workflow - Thermal Losses (TL) block

Communication port configuration for the Thermal Losses (TL) block

Analog Output Mapping and Rescaling module (AOMR)

AUTOMATIC AND NOT VISIBLE IN SCHEMATIC EDITOR WORKFLOW

AOMR Master Subsystem (SM) block

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

Analog Input Differential Rescaling module (AIR)

AUTOMATIC AND NOT VISIBLE IN SCHEMATIC EDITOR WORKFLOW

AIR block

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

AOMR Output

SFP Mapping and Communication Block

Schematic Editor Workflow - SFP Mapping and Communication block

Communication port configuration for the SFP mapping and communication block

Analog In module (AI)

SPS Workflow - AI block

Schematic Editor Workflow - OPAL-Board/AI

RT-LAB

HYPERSIM

Communication port configuration for the Analog Input (AI) block

Connector Pin Assignment

Analog Out module (AO)

SPS Workflow - AO block

Schematic Editor Workflow - OPAL-Board/AO

RT-LAB

HYPERSIM

Communication port configuration for the Analog Output (AO) block

Connector Pin Assignment

Digital In module (DI)

SPS Workflow - DI block

Schematic Editor Workflow - OPAL-Board/DI

RT-LAB

HYPERSIM

Communication port configuration for the Digital Input (DI) block

Connector Pin Assignment

Digital Out module (DO)

SPS Workflow - DO block

Schematic Editor Workflow - OPAL-Board/DO

RT-LAB

HYPERSIM

Communication port configuration for the Digital Output (DO) block

Connector Pin Assignment