Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Kintex-7 410T - eHS x128 - PMSM SH - IOconfig1

Owned by Sylvain Ménard

Last updated: Mar 31, 2023

3 min read

1 System Overview

SCHEMATIC EDITOR workflow

Introduction

This firmware includes:

One eHS x128 Gen4 Solver
One Dual Permanent Magnet Synchronous Machines (PMSM-SH) model
One Analog Output Mapping and Rescaling (AOMR) module
One Analog Input Differential Rescaling (AIR) module
One Thermal Losses (TL) module
One Saturable Transformer (satXFO) module

LoadIn/DataIn/DataOut mapping

	LoadIn	DataIn	DataOut
1	Config eHS	Inputs eHS	eHS Averaged
2	Scenario / Rst eHS = Status	TSDO 1 - eHS 0 to 7	eHS DownSample
3		TSDO 2 - eHS 8 to 15	Digital In 1A - 0 to 7
4	PWM 1B - 0 to 7	TSDO 3 - eHS 16 to 23	Digital In 1A - 8 to 15
5	PWM 1B - 8 to 15	TSDO 4 - eHS 24 to 31	Digital In 1A - 16 to 23
6	PWM 1B - 16 to 23	TSDO 5 - eHS 32 to 39	Digital In 1A - 24 to 31
7	PWM 1B - 24 to 31	TSDO 6 - eHS 40 to 47	Analog In 2A - 0 to 7
8		TSDO 7 - eHS 48 to 55	Analog In 2A - 8 to 15
9		TSDO 8 - eHS 56 to 63	PMSM SH 1/2
10		TSDO 9 - eHS 64 to 71	Encoder Input on RS422
11		Digital Out 1B - SDO 0 to 7	Encoder Input on Digital In 1A
12	Config AOMR	Digital Out 1B - SDO 8 to 15	Thermal Losses
13	eHS PWM 1 - eHS 0 to 7	Digital Out 1B - SDO 16 to 23
14	eHS PWM 2 - eHS 8 to 15	Digital Out 1B - SDO 24 to 31
15	eHS PWM 3 - eHS 16 to 23
16	eHS PWM 4 - eHS 24 to 31
17	Config eHS AIR
18	Config PMSM SH 1/2
19	Config Encoder Input on RS422	AOMR/ Analog Out 2B - 0 to 7
20		Analog Out 2B - 8 to 15
21	Config Encoder Input on Digital In 1A
22	Config Thermal Losses
23	Config Encoder Output on RS422	eHS PWM 1 - 0 to 7
24		eHS PWM 2 - 8 to 15
25		eHS PWM 3 - 16 to 23
26		eHS PWM 4 - 24 to 31
27		eHS SWG
28		PMSM SH 1/2
29
30		Thermal Losses
31		Encoder Output on RS422
32		LEDs

System Overview

Communication port configuration for the Dual PMSM (SH) block

	Dual PMSM Motors SH
Machine Label	PMSM 1	PMSM 2
Data In Port Number	28
Load In Port Number	18
Data Out Port Number	9

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Analog In - Slot 2A - Ch00-01

Encoder Output

Encoder outputs are sent to

Digital Out - Slot 1B/ Slot 3B - RS422

	Encoder 1	Encoder 2
A	Ch00	Ch04
B	Ch01	Ch05
Z	Ch02	Ch06

Hardware Pin assignment

Communication port configuration for the Thermal Losses (TL) block

	Thermal Losses
Data In Port Number	30
Load In Port Number	22
Data Out Port Number	12

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

	AOMR - Slot 2B
Version	V2
Data In Port Number	19
Load In Port Number	12

AOMR Output

Lane Index	Signal Source	Details
0	eHS Outputs	eHS Y00-128
1	PMSM SH 1/2 AnalogOut	Dual PMSM SH Model

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

	AIR - Slot 2A
Channels	Ch00-15
Load In Port Number	17

Communication port configuration for the Analog Input (AI) block

	Slot 2A
Channels	Ch00-07	Ch08-15
Data Out Port Number	7	8

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Communication port configuration for the Analog Output (AO) block

	Slot 2B
Channels	Ch00-07	Ch08-15
Data In Port Number	19	20

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Communication port configuration for the Digital Input (DI) block

	Slot 1A
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data Out Port Number	3	4	5	6

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Communication port configuration for the Digital Output (DO) block

	Slot 1B
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data In Port Number	11	12	13	14
Load In Port Number	4	5	6	7

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Communication port configuration for the Encoder Intput (ENC IN) block

	Slot 3A - RS422
Nb of Encoder Signals	2
Load In Port Number	11
Data Out Port Number	10

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Communication port configuration for the Encoder Output (ENC OUT) block

	Slot 3B - RS422
Nb of Encoder Signals	2
Data In Port Number	31
Load In Port Number	23

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323