Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP5966 RTSI Signal Converter module


The OP5966 is an RTSI converter module that converts synchronization signals from copper to fiber optic.

Added to a standard rack (using an optional clip) or mounted on a desktop, it allows users to switch from copper cable connection to fiber optic.

The change to fiber optic cables means that longer cable lengths (30 m) can be used without affecting signal quality.

Because the repeater acts as a link, it must be used at each end of the extension cable.


The OP5966 chassis has two separate sections for input and output connectors:



fiber optic signal input from source (master) connected to OP5966.
MAIN SOURCECopper RTSI signal input from simulator source (master).
CURTSI copper signal output to target simulator (slave).
FBfiber optic signal output to OP5966.

Module installation


Product name

OP5966 RTSI Signal Converter Module

Dimensions (HxWxD)

3.63 x 12.14 x 12.58 cm (1.324” x 4.78” x 4.954”)
I/O connector3.5mm stereo jack
POF fiber optic

Operating temperature

10 to 40 ºC (50 to 104ºF)

Relative humidity

10 to 90%, non condensing

Maximum altitude

2,000 m (6562 ft.)

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323