/
OP5971 DB37 to SMB Adaptor

Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP5971 DB37 to SMB Adaptor

Page Content

Description

The OP5971 was designed as a convenient solution to connect each individual channel routed through OPAL-RT’s standard DB37 I/O connector.
There is no signal conditioning or any impact on the signals. The OP5971 simply passes signals through the DB37 to SMB.

Pin Assignments

The table below gives the pin-out of the DB37 I/O connector and the corresponding SMB pin-out. Note that all SMB connectors are referenced to the same GND.

DB37 Pin

Standard

DB37 Pinout

SMB Pinout