After opening the package, remove the equipment and components. Make sure that all the items described in Standard Hardware are actually in the box and are undamaged.
The OP4520 real-time simulator includes the following basic hardware:
I/O cables and connectors
DB37 loopback board DB37 loopback cable
DB9 terminal block (optional)
DB37 terminal block (optional
5m Plastic Optical Fibers (optional)
(only for OP4520-IO-PCIe)
10m Active PCIe x4 optical fiber
PCIe adaptor card for the target system (optional)
High speed communication link
optional for OP4510-IO-PCIe
OP4520-IO-REMOTE comes with two transceivers and one cable
SFP transceivers (AFBR-57R5APZ)
LC-LC multimode fiber cable, 30m
1.83 m (6’) power cord, black (10A 125V)
System Integration binder
OPAL-RT strongly recommends the use of anti-static wrist straps whenever handling any electronic device provided by OPAL-RT. Damage resulting from electrostatic charges is not covered by the manufacturer’s warranty.
The OP4520 may be subjected to EMI when installed in proximity to other devices. Make sure to connect the OP4520 ground to the rack to prevent any EMI related damage to the simulator.
Disconnect power before servicing
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323