Table of Content

After opening the package, remove the equipment and components. Locate all the items described in Standard Hardware. Make sure that they are undamaged.

Standard Hardware

The OP4610XG real-time simulator includes the following basic hardware:

Item	Description	Part Number
OP4610XG simulator	Full simulator equipped with AMD Ryzen^TM 6 cores, 3.8 GHz or equivalent, 16 GB RAM, 250 GB SSD	429-0220
Loopback kit	Loopback board	126-0361
Loopback kit	Loopback cable	113-0737
RJ45 cable	CAT6 (500 MHz) UTP Network Cable - Blue 3 m (10 ft)	T00-0817
Power cable	1.83 m (6 ft) power cord, black (10 A,125 V)	T00-0833
System Integration binder	Includes system description document and test reports, RT-LAB software, OPAL-RTLinux operating system and documentation CD	N/A

Optional Hardware

Item	Description	Part Number
MuSE transceiver	Avago AFBR-57R5APZ	T00-0315
MuSE cable	LC-LC multimode 850 nm optical fiber, 2 m (longer cables available)	T00-0797

Rack Mount Brackets and Handles Assembly (Optional)

Usually, the rack mount brackets and handles are not assembled to the chassis.

Hardware List

The hardware for the rack mount brackets and handles are provided in a plastic bag.

2x 110-3124 - 3U Rack Mount Brackets
2x T00-8185 - Pull Handles Black Anodized Alu. 8-32 x 3.5"
4x T00-6800 - Black SS Phillips Flat Head Screws 8-32 X ½" long
8x T00-1402 - Black, SS, Phillips Flat Head Screws 6-32 x 5/16" long

Assembling

Follow these simple steps to install the brackets and the handles.
For each side:

Remove the two (2) top front screws.
- Put the screws away, they will be replaced with longer ones.

Assemble the rack mount bracket using 4 screws.
- Do not use the screws you removed in the previous steps, they are too short.
- 4 screws per bracket, 6-32 x 5/16" flat head, Phillips, OPAL-RT P/N T00-1402

Assemble the handle to the bracket using two (2) screws.
- 2 screws per handle, 8-32 x ½" flat head, Phillips, OPAL-RT P/N T00-6800

Hardware Products Documentation

OP4610XG Receiving and Verification