Documentation Home Page Power Electronics Add-On for NI VeriStand Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Hardware Requirements

The hardware requirements for the Add-On vary based on the selected Hardware Configuration. Each configuration implements different IO counts, FPGA types, and modeling capabilities.

Unless stated otherwise, there are no restrictions on the NI PXI chassis and controller models to be used with each supported configuration. Since every application has a unique set of requirements and may require additional hardware (ex. DAQ, XNET, etc), the chassis and controller should be selected on a case-by-case basis. For most hardware-in-the-loop applications, OPAL-RT recommends the following chassis and controllers.  Additional information regarding specific FPGA requirements can be found on the description page for each Hardware Configuration.

NI PXI Chassis (recommended)

NI PXI Chassis (recommended)

PXIe-1092

PXIe-1095

NI PXI Controller (recommended)

NI PXI Controller (recommended)

PXIe-8881

 

 

 

Recommended System Hardware

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter