Block
Table of Contents
Description
This block filters the output data stream based on a given Data ID allowing the Valid signal only when the Data ID set in the mask matches signal's Data ID.
Mask Parameters
Data ID: This parameter sets the Data ID value to be filtered.
Inputs
Init_data_in: The decoded data stream from the address filter's output signal should be connected to this port.
Outputs
Data: The filtered data is outputted through this port.
Characteristics and limitations
| Direct Feedthrough | NO |
| Discrete sample time | YES |
| XHP support | N/A |
| Work offline | YES |
If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.