Documentation Home Page ◇ HIL2GO Main Menu
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
HIL2GO-100 - I/O Group 2, Section A (CH 00-15) - Analog Inputs (OP5342)
- Sylvain Ménard
Connected I/O module is OP5342 - 16 analog input, 2 MSPS
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.
Before connecting the cables, make sure that the voltages or other electrical specifications are compatible with OPAL-RT DB37 specifications of I/O module OP5342.
Connector P1 |
| |||
|---|---|---|---|---|
DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +AIN00 | 20 | -AIN00 | |
2 | +AIN01 | 21 | -AIN01 | |
3 | +AIN02 | 22 | -AIN02 | |
4 | +AIN03 | 23 | -AIN03 | |
5 | +AIN04 | 24 | -AIN04 | |
6 | +AIN05 | 25 | -AIN05 | |
7 | +AIN06 | 26 | -AIN06 | |
8 | +AIN07 | 27 | -AIN07 | |
9 | +AIN08 | 28 | -AIN08 | |
10 | +AIN09 | 29 | -AIN09 | |
11 | +AIN10 | 30 | -AIN10 | |
12 | +AIN11 | 31 | -AIN11 | |
13 | +AIN12 | 32 | -AIN12 | |
14 | +AIN13 | 33 | -AIN13 | |
15 | +AIN14 | 34 | -AIN14 | |
16 | +AIN15 | 35 | -AIN15 | |
17 | +12 V* | 36 | GND | |
18 | Not used | 37 | Not used | |
19 | Not used |
|
| |
* Internally provided by the simulator. Non-isolated, limited to 400 mA.
ANALOGIN BLOCK PARAMETERS | ||
Parameters | CH00-07 | CH08-15 |
Controller Name | 'OP4512 OpCtrl' | |
DataOut Port Number | 7 | 8 |
Number of channels | 8 | 8 |
Sample Time (s) | 0 | 0 |
Add label
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323