Documentation Home Page ◇ ARTEMiS Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Using Offline Simulation with ARTEMiS

Owned by Sylvain Ménard
Last updated: May 08, 2023
1 min read

Using ARTEMiS' Add-On for SPS:

  • Start MATLAB and open a Simulink model that uses the blocks from the Simscape Electrical Specialized Power Systems blockset such as SPS demo power_monophaseline by typing the following command:

    >> power_monophaseline



  • From the MATLAB command window, open the ARTEMiS library prompt by typing artemis. The ARTEMiS library window is displayed.

    >> artemis



  • Click the ARTEMiS block and drag the ARTEMiS Guide block into your model.



  • Run your model. Once the ARTEMiS Guide block is placed in a model, the linear part of the power system is simulated using the fixed time step algorithm and options specified in the ARTEMiS Guide dialog box.
  • If both the ARTEMiS Guide block and the PowerGUI block from Simscape Electrical - Specialized Power Systems blockset are present in a model, the ARTEMiS Guide block has precedence.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter