Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
V2.14 Virtex-7 VC707 - eHS x128 - Gen5 - IO Config1
- Fabien Ducat
OPAL-RT TECHNOLOGIES
1751 Richardson suite 1060, Montréal QC Canada H3K 1G6
www.opal-rt.com
© 2023 OPAL-RT TECHNOLOGIES All rights reserved
Legend
SCHEMATIC EDITOR WORKFLOW
Introduction
This firmware includes:
- One eHS x128 Gen5 Solver
- One Analog Output Mapping and Rescaling (AOMR) module
- One Analog Input Differential Rescaling (AIR) module
- One Saturable Transformer (satXFO) module
LoadIn/DataIn/DataOut mapping
Port | LoadIn | DataIn | DataOut |
1 | Config eHS | Inputs eHS | eHS Averaged |
2 | Scenario / Rst eHS = Status | TSDO 1 - eHS 0 to 7 | eHS DownSample |
3 | TSDO 2 - eHS 8 to 15 | Digital In 2A - 0 to 7 | |
4 | PWM 2B - 0 to 7 | TSDO 3 - eHS 16 to 23 | Digital In 2A - 8 to 15 |
5 | PWM 2B - 8 to 15 | TSDO 4 - eHS 24 to 31 | Digital In 2A - 16 to 23 |
6 | PWM 2B - 16 to 23 | TSDO 5 - eHS 32 to 39 | Digital In 2A - 24 to 31 |
7 | PWM 2B - 24 to 31 | TSDO 6 - eHS 40 to 47 | Digital In 4A - 0 to 7 |
8 | PWM 4B - 0 to 7 | TSDO 7 - eHS 48 to 55 | Digital In 4A - 8 to 15 |
9 | PWM 4B - 8 to 15 | TSDO 8 - eHS 56 to 63 | Digital In 4A - 16 to 23 |
10 | PWM 4B - 16 to 23 | TSDO 9 - eHS 64 to 71 | Digital In 4A - 24 to 31 |
11 | PWM 4B - 24 to 31 | Digital Out 2B - SDO 0 to 7 | Analog In 1B - 0 to 7 |
12 | Config AOMR | Digital Out 2B - SDO 8 to 15 | Analog In 1B - 8 to 15 |
13 | eHS PWM 1 - eHS 24 to 31 | Digital Out 2B - SDO 16 to 23 | PMSM VDQ 2 |
14 | eHS PWM 2 - eHS 0 to 7 | Digital Out 2B - SDO 24 to 31 | PMSM VDQ 2 |
15 | eHS PWM 3 - eHS 8 to 15 | Digital Out 4B - SDO 0 to 7 | eHS Period Averaged |
16 | eHS PWM 4 - eHS 16 to 23 | Digital Out 4B - SDO 8 to 15 | eHS Period DownSample |
17 | Config AIR | Digital Out 4B - SDO 16 to 23 | TimeOn Averaged |
18 | Config PMSM VDQ 1 | Digital Out 4B - SDO 24 to 31 | TimeOn DownSample |
19 | Config PMSM VDQ 2 | AOMR/Analog Out 1A - 0 to 7 | RMS and Power calculation |
20 | Analog Out 1A - 8 to 15 | ||
21 | Analog Out 3A - 0 to 7 | ||
22 | SFP | Analog Out 3 - 8 to 15 | |
23 | Lookup table | eHS PWM 1 - 0 to 7 | |
24 | Config AOMR | eHS PWM 2 - 8 to 15 | |
25 | RMS and Power calculation | eHS PWM 3 - 16 to 23 | |
26 | eHS PWM 4 - 24 to 31 | ||
27 | eHS SWG | ||
28 | PMSM VDQ 1 | ||
| 29 | PMSM VDQ 2 | ||
30 | |||
| 31 | Analog Out 3B - 0 to 7 | ||
| 32 | Analog Out 3B - 8 to 15 | ||
| 33 | |||
| 34 | SFP | ||
| 35 | Lookup Table Config |
System Overview
Extensive I/O compatibility (Polymorphism)
Listed cards are compatible at the same location (More details)
|
| ||||||||||||||||||
|
|
SFP Mapping and Communication Block
A total of 32 inputs and 32 outputs are available and configured using the SFP mapping and communication block.
Schematic Editor Workflow - SFP Mapping and Communication block
Communication port configuration for the SFP mapping and communication block
SFP - Channel 0 | |
|---|---|
| Data In Port Number | 34 |
| Load In Port Number | 22 |
Analog In module (AI)
AI block reads signals from analog input channels on the simulator.
Schematic Editor Workflow - OPAL-Board/DO
RT-LAB
HYPERSIM
Analog Out module (AO)
AO block configures analog output channels on the simulator.
Schematic Editor Workflow - OPAL-Board/DO
RT-LAB
HYPERSIM
Digital In module (DI)
DI block reads signals from digital input channels on the simulator. It could be static, TSDI or PWMIn.
Schematic Editor Workflow - OPAL-Board/DO
RT-LAB
HYPERSIM
Digital Out module (DO)
DO block configures digital output channels on the simulator. It could be static, TSDO or PWMOut.
Schematic Editor Workflow - OPAL-Board/DO
RT-LAB
HYPERSIM
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter