OP4610-IO Standard Configuration

A. DB37 connectors for digital or analog inputs and outputs.

B. In the standard OP4610-IO configuration, this section contains a DB9 connector module for RS422 signals typically used to transmit differential encoder inputs and outputs; however, other options are available.

See OP4610-IO I/O Expansion Options below for detailed information on available configuration options.

C. Power connector and main switch.

D. Ground screw.

E. One PCIe free slot is available for optional I/O card. See OP4610-IO PCIe Optional I/O cards below.

OP4610-IO I/O Expansion Options

The OP4610-IO comes with an RS-422 Connector Kit (OP5969-1) factory installed by default.

The optional Fiber-Optic Connector Kit (OP5969-2) can also be installed. It will replace the default connector kit, since only ONE of these connector kits can be installed in an OP4610-IO at a time.

The optional connector kit must be selected at the time of purchase and factory-installed.

RS422 Connector kit (OP5969-1)		DEFAULT connector kit installed The DB9 connectors for RS422 signals are typically used to transmit differential encoder inputs and outputs. Refer to the OP5969-1 User Manual for specifications and pin assignment.
Fiber-Optic Connector kit (OP5969-2)		OPTIONAL connector kit Fiber-optic connector kit provides 6 RX and 6 TX channels. These channels can be used as digital I/Os or for low-speed communication protocols. The ORION protocol, developed by OPAL-RT is compatible with these channels and available in custom bitstreams. Refer to the OP5969-2 User Manual for specifications and pin assignment.

OP4610-IO PCIe Optional I/O cards

The following PCIe options are available for the OP4610-IO:

Dolphin SW-Link PCIe adapter (OP4610-IO-DLPH, P/N 429-0246)
PCIe Target Cable Adapter (OP4610-IO-PCIE, P/N 429-0270)

Hardware Products Documentation

OP4610-IO Rear Connectors

OP4610-IO Standard Configuration

OP4610-IO I/O Expansion Options

OP4610-IO PCIe Optional I/O cards