Documentation Home Page Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

OP8660 Front Interface

The interfaces provided on the OP8660 are either banana jacks or DB9. Depending on the type of simulator used and the number of I/Os modules it contains, some of these connectors may be inactive.

OP8660 Front Connector Panels

A6-Pulse Inverter Output DB9 connector used to send control pulses to the motor.
BEncoder Input connector used to read motor speed and position using differential ABZ encoder signals.
CAnalog and digital input/output monitoring connectors for each channel (16 analog or 8 digital).
DHigh current probe connectors (maximum 15 A AC), with red and green LEDs to indicate channel activity.
EHigh voltage probe connectors (maximum 600 V), with red and green LEDs to indicate channel activity.
FPower switch and ground connector.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323