Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
RPG ELCO-56 pins assignment
- Sylvain Ménard
Owned by Sylvain Ménard
Pin-out legend
| Signal name | Type of feature | Reference |
|---|---|---|
CAM1:4 | CAM Phasing output | Engine Synchronous Pulse Generation / Pulse train outputs |
EST1:12 | Engine Spark Timing input | Engine Synchronous signals capture |
EST_BIAS_VOLT | Bias voltage input for EST | Engine Synchronous signals capture / Rails |
HIRES | High-Resolution Position Pulse ouptut | Engine Synchronous Pulse Generation / HIRES |
INJ1:12 | Injector input | Engine Synchronous signals capture |
INJ_BIAS_VOLT | Bias voltage input for INJ | Engine Synchronous signals capture / Rails |
KNOCK_OUT | Knock output signal | Knock sensor output simulation |
KNOCK_HI_RES | Filtered knock output signal | Knock sensor output simulation |
RESET | 0 deg. pulse output | Engine Synchronous Pulse Generation / Reset |
RP1:8 | Reference Pulse output | Engine Synchronous Pulse Generation / Pulse train outputs |
RPBV1:8 | Bias voltage input | Reference pulse bias voltage |
TDC | Top Dead Center output | Engine Synchronous Pulse Generation / Pulse train outputs |
| ID_CBL0:3, ID_CBL (GND) | Cable ID | Cable Identification |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter