Declaration of Conformity CE | OPAL-RT SLSC Boards

Manufacturer Name/Address:

OPAL-RT Technologies Inc.

1751 Richardson suite 1060, Montreal,

QC H3K 1G6 Canada https://www.opal-rt.com

This declaration of conformity is issued under the sole responsibility of: OPAL-RT Technologies Inc.

Product Model/Product

Product

Product
OP8911-F & OP8911-N
OP8913-F & OP8913-N
OP8915-F & OP8915-N
OP8931-F & OP8931-N
OP8932-F & OP8932-N
OP8933-F & OP8933-N
OP8934-F & OP8934-N
OP8935-F & OP8935-N
OP8940-F & OP8940-N
OP8926-F & OP8926-N

Product Description

Digital and Analog Input and Output cards with optional fault insertion capability connected in the Switch Load and Signal Conditioning (SLSC) chassis from National Instruments intended for indoor use only.

Ratings: 24V 15%, DC, 1.2 A max, 25W max, pollution degree 2

Product Category

Electrical equipment for measurement, control, and laboratory use.

Conformity with the Relevant Community Harmonization Legislation

2014/30/EU - Electromagnetic Compatibility Directive
2014/35/EU - Low Voltage Directive
2011/65/EU - Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) directive
2012/19/EU - Waste from Electrical and Electronic Equipment (WEEE) Directive
This product is compliant with Regulation (EC) No 1907/2006 (REACH). It contains one or more substances of very high concern (SVHC) above 0.1% w/w, and all obligations under Article 33(1) have been fulfilled, including notification to the ECHA SCIP database. https://echa.europa.eu/fr/scip-database

UKCA Conformity with the Relevant Harmonization Legislation

Electromagnetic Compatibility Regulations 2016
Electrical Equipment (Safety) Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

References to the standards in relation to which conformity is declared

References to the standards in relation to which conformity is declared
Category	Standards	Test Specifications
Emissions:	EN61326-1 (2013) / IEC61326 (2012)
	FCC part 15 (2020) subpart B ICES-003 (2016) + Update (2019)	Conducted Emissions: Class A 150kHz-30MHz Radiated Emissions: Class A 30MHz -1GHz
	EN55011 (2016) A1(2017) CISPR11 (2015)A1 (2016)	Conducted Emissions: Group 1 - class A 150kHz-30MHz Radiated Emissions: Group 1 - class A 30MHz-1GHz
Immunity:	EN 61000-4-2 (2009) IEC 61000-4-2 (2008)	Contact: ±4kV Air: ±2kV, ±4kV, ±8kV
	EN 61000-4-3 (2006) A1(2007) A2 (2010) IEC 61000-4-3 (2006) A1(2008) A2(2010)	80MHz-1000MHz: 10V/m 1.4GHz-2GHz: 3V/m 2GHz-2.7GHz: 1V/m
	EN 61000-4-4 (2012) IEC 61000-4-4 (2012)	Power: ±2kV / 5kHz I/O Ports: N/A Communication Ports (Ethernet): ±1kV/ 5kHz
	EN 61000-4-5 (2014) IEC 61000-4-5 (2014)	Power: ±2kV L-PE / ±1kV L-L I/O Ports: N/A Communication Ports: N/A
	EN 61000-4-6 (2014) IEC 61000-4-6 (2013)	Power: 3V I/O Ports: N/A Communication Ports (Ethernet): 3V
	EN 61000-4-8 (2010) IEC 61000-4-8 (2009)	Continuous Field: 3Nm / 50Hz & 60Hz
	EN 61000-4-11 (2004) A1 (2017) IEC 61000-4-11 (2004)A1 (2017)	Voltage dips: 0%Un during half cycle 0%Un during 1 cycle 40%Un during 10 cycles (at 50Hz) 40%Un during 12 cycles (at 60Hz) 70%Un during 25 cycles (at 50Hz) 70%Un during 30 cycles (at 60Hz) Short interruptions: 0%Un during 250 cycles (at 50Hz) 0%Un during 300 cycles (at 60Hz)
Safety:	EN 61010-1 / IEC 61010 Edition 3.1 2017-01