Declaration of Conformity UKCA CE for the OP4810-IO and the OP4815-IO

	File	Modified
Labels No labels Preview View	PDF File OP481X-IO-CE_UKCA_Declaration_of_Conformity-1V0.pdf	Oct 24, 2024 by Sylvain Ménard

OPAL-RT Technologies Inc.
1751 Richardson suite 1060
Montréal, QC H3K 1G6 Canada
www.opal-rt.com

This declaration of conformity is issued under the sole responsibility of: OPAL-RT Technologies Inc.

Product Model/Product

OP4810-IO/OP4815-IO with any of the following options:

Simulator with Digital and Analog Input and Output cards intended for indoor use only.
Ratings: 100-240 VAC, 250 W max, pollution degree 2.

Electrical equipment for measurement, control, and laboratory use.

2014/30/EU - Electromagnetic Compatibility Directive
2014/35/EU - Low Voltage Directive
2011/65/EU & (EU) 2015/863 - Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) directive
2012/19/EU - Waste from Electrical and Electronic Equipment (WEEE) Directive

Electromagnetic Compatibility Regulations 2016
Electrical Equipment (Safety) Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

References to the standards in relation to which conformity is declared

References to the standards in relation to which conformity is declared
Category	Standards	Test Specifications
Emissions:	EN IEC 61326-1:2021
Emissions:	EN55011 (2016) A1(2017) CISPR11 (2015) A1(2016) A2 (2019)	Conducted Emissions: Group 1 - class A 150 kHz-30 MHz Radiated Emissions: Group 1 - class A 30 MHz-1 GHz, 1 GHz-20 GHz
Immunity:	IEC61000-4-2 (2008)	Contact: ±4 kV Air: ±2 kV, ±4 kV, ±8 kV
	IEC61000-4-3 (2020)	80MHz-1000MHz: 10V/m 1.4GHz-6GHz: 3V/m
	IEC61000-4-4 (2012)	Power: ±2 kV / 5 kHz & 100 kHz I/O Ports: NA I/O Ports connected to power: ±1 kV / 5 kHz & 100 kHz
	IEC61000-4-5 (2014) A1(2017)	Power: ±2 kV L-PE / ±1 kV L-L I/O Ports: N/A Communication Ports: N/A
	IEC61000-4-6 (2013)	Power: 3 V I/O Ports: N/A Communication Ports (Ethernet): 3 V
	IEC61000-4-8 (2009)	Continuous Field: 30A/m - 50 Hz & 60 Hz
	IEC61000-4-11 (2020)	Voltage dips: 0%Un during 1 cycle 40%Un during 10 cycles (at 50 Hz) 40%Un during 12 cycles (at 60 Hz) 70%Un during 25 cycles (at 50 Hz) 70%Un during 30 cycles (at 60 Hz) Short interruptions: 0%Un during 250 cycles (at 50 Hz) 0%Un during 300 cycles (at 60 Hz)
Safety:	EN 61010-1:21010/A1:2019 IEC 61010-1:2010, IEC 61010-1:2010/AMD1:2016	Test procedure: CB Scheme