Front Controls

Open

OP5020XG front view

1. Power and Reset Push Button with LED indicator:

   • Normal press: Power On or shut down the unit.

   • Long press: If the button is pressed for at least 4 seconds, the unit will shut down.

   • Integrated LED

     • Green: The unit is On

     • Black (unlit): The unit is Off

Rear Connectors and Controls

Open

OP5020XG rear view

1. Master power switch ‡

2. Power cord connector ‡

3. Serial port (COM1)

4. LAN RJ-45 Port (IPMI)*

5. USB 2.0 type A ports

6. USB 3.0 type A ports

7. 2x LAN RJ-45 Gigabit Ethernet (1 Gbps) ports (LAN1 and LAN2)*

8. VGA port

9. UID Switch
   With the Unique Identification (UID) button, you are able to locate the server you’re working on from behind a rack of servers.
   When the UID button on the front or rear panel is pressed, the front/rear UID blue LED indicator will be turned on.
   Press the UID button again to turn off the indicator.

10. Optional PCIe x4 Gen 2 Host Adapter (not shown)

‡ Power supply unit (PSU) master switch (#1) and power cord connector (#2) positions may be different, depending on the PSU supplier. Fan grid may also look different.
* See LED indication below

1G LAN Port (LAN1, LAN2) LED Indications

Dedicated IPMI LAN Port LED Indications