Documentation Home Page ◇ HIL2GO Main Menu
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
HIL2GO-310 - OP5020XG CPU-based Real-time Simulator Hardware Description
- Sylvain Ménard
Page Content
General Overview
The OP5020XG is a powerful simulation target 2U computer, installed on a tabletop or mounted directly in a standard 19 inches rack. It can be connected to OPAL-RT’s FPGA Processor and I/O Expansion Units via a PCIe host adapter to have a complete HIL system. It is especially suited for the OP4810-IO or the OP4815-IO FPGA Processor and I/O Expansion Units.
The OP5020XG is the PC part of your simulation system. It contains a motherboard with a CPU, RAM and mass storage SSD, and OPAL-RTLinux. RT-LAB for target is executing in the section.
Unit Information
Simulator specifications are described in the OP5020XG user manual.
Network port eno1 default IP address is written on a label on the front of the simulator in the left bottom corner (see the illustrations below).
This port usually connects to your organization’s Local Area Network (LAN) through a router or a network switch.The network port eno2 is used to connect via Ethernet the OP5020XG simulator to the OP4810-IO FPGA Processor and I/O Expansion Unit for bitstream flashing.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter