Documentation Home Page ◇ Power Electronics Add-On for NI VeriStand Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

2.6 Setting Default Values for the Signal Generators

Owned by Sylvain Ménard
Last updated: Dec 04, 2023 by Pierre-Luc Renault (Unlicensed)
1 min read

Sinewave Generators

Frequency Engines

 

Channel Name

Default Value

 

Frequency Engine 0

60Hz

SWG 0

 

Channel Name

Default Value

 

Frequency Engine

0

 

Phase

0º

SWG 1

 

 

Channel Name

Default Value

 

Frequency Engine

0

 

Phase

-120º

SWG 2

 

Channel Name

Default Value

 

Frequency Engine

0

 

Phase

120º

 

 

The default value of the Phase channel of SWG 1 is set to -120.  The default values for the other channels listed above can be configured in a similar manner.

SPWM Generators

SPWM Carrier

 

Channel Name

Default Value

 

Carrier Frequency

5000Hz

SPWM Generator 0

 

Channel Name

Default Value

 

Frequency Engine

0

 

Phase

0º

SPWM Generator 1

 

 

Channel Name

Default Value

 

Frequency Engine

0

 

Phase

-120º

SPWM Generator 2

 

Channel Name

Default Value

 

Frequency Engine

0

 

Phase

120º

 

 

The default value of the Phase channel of SPWM Generator 1 is set to -120.  The default values for the other channels listed above can be configured in a similar manner.

 

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323