Documentation Home Page ◇ RT-LAB Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
OpNI670x Digital Out
Block
Mask
Description
The National InstrumentsNI6703 and NI6704 cards feature 16 voltage outputs and 8 digital I/O lines. The NI6704 card also features 16 current outputs. This block monitors the digital I/O lines and configures them as output channels.
Parameters
Bus Type | Select the bus type (PCI or PXI) of the target node in this list. |
---|---|
Card Type | Select the card model in this list. |
PCI index | Enter the PCI index (see definition)of the card on the PCI (or PXI) bus. |
Selection of channels used in output | Enter the vector of channel numbers to be monitored by this block. The channel numbers, in the range [0-7], can be entered in any order and must appear only once in the list. |
Synchronize | see definition. |
Inputs
At each calculation step of the model, the block outputs to the I/O lines the values calculated in the model. Three sets of input values must be specified:
reset | Values that will be written to the selected I/O channels when the reset button is hit. |
---|---|
pause | Values that will be written to the selected I/O channels when the model is in pause mode, that is at initialization or when the pause button is hit. |
run | Values that will be written to the selected I/O channels at each time step. |
Note: To ensure that the pause and reset values be properly written out, it is recommended to set these values in the model subsystem that contains the OpNI670x Digital Out block, and not to provide them from the console subsystem.
Outputs
This block has no outputs.
Characteristics and Limitations
Connector Pin Assignments
The following table gives the description of the signals related to the digital IO channels and is followed by the connector pin assignments of the 68-pin I/O connector.
Signal Name | Signal Description |
---|---|
DIO0..7 | Digital IO lines |
DGND | Digital IO ground pins. |
68-pin I/O
Pin | Description | Pin | Description |
---|---|---|---|
34 | VCH0 | 68 | AGND0/AGND16 |
33 | AGND1/AGND17 | 67 | ICH16 |
32 | ICH17 | 66 | VCH1 |
31 | VCH2 | 65 | AGND2/AGND18 |
30 | AGND3/AGND19 | 64 | ICH18 |
29 | ICH19 | 63 | VCH3 |
28 | VCH4 | 62 | AGND4/AGND20 |
27 | AGND5/AGND21 | 61 | ICH20 |
26 | ICH21 | 60 | VCH5 |
25 | VCH6 | 59 | AGND6/AGND22 |
24 | AGND7/AGND23 | 58 | ICH22 |
23 | ICH23 | 57 | VCH7 |
22 | VCH8 | 56 | AGND |
21 | ICH24 | 55 | AGND8/AGND24 |
20 | AGND9/AGND25 | 54 | VCH9 |
19 | AGND | 53 | ICH25 |
18 | AGND10/AGND26 | 52 | VCH10 |
17 | VCH11 | 51 | ICH26 |
16 | ICH27 | 50 | AGND11/AGND27 |
15 | VCH12 | 49 | AGND12/AGND28 |
14 | AGND13/AGND29 | 48 | ICH28 |
13 | ICH29 | 47 | VCH13 |
12 | VCH14 | 46 | AGND14/AGND30 |
11 | AGND15/AGND31 | 45 | ICH30 |
10 | ICH31 | 44 | VCH15 |
9 | DIO7 | 43 | AGND |
8 | DIO6 | 42 | DGND |
7 | DIO5 | 41 | DGND |
6 | DIO4 | 40 | RFU |
5 | DIO3 | 39 | DGND |
4 | DIO2 | 38 | RFU |
3 | DIO1 | 37 | DGND |
2 | DIO0 | 36 | DGND |
1 | +5V | 35 | DGND |
Direct Feedthrough | No |
---|---|
Discrete sample time | No |
XHP support | Yes |
Work offline | No |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter