Documentation Home Page Courseware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

DCM - List of Figures and Tables

List of Figures

  • Figure 1: Virtual Test Bench of the DCM Drive
  • Figure 2: Open Circuit Test for the Determination of Ke
  • Figure 3: Steady State Test for the Determination of Ra
  • Figure 4: Blocked Rotor Test for the Determination of La
  • Figure 5: Identification of Friction Parameters
  • Figure 6: Identification of the Moment of Inertia
  • Figure 7: Closed-Loop Current Control
  • Figure 8: Closed-Loop Speed Control
  • Figure 9: Start-Up Panel of the DC Motor Drive Laboratory
  • Figure 10: DC Machine Armature Connected to the Inverter
  • Figure 11: MUT Armature Connected to the Inverter
  • Figure 12: Connection of the DCM Resistive Load
  • Figure 13: Activation of Blocked Rotor Test
  • Figure 14: Activation of Trigger Level
  • Figure 15: Activation of Current Control
  • Figure 16: Activation of Speed Control

List of Tables

  • Table 1: Control Parameters of the DCM Drive
  • Table 2: Control Buttons and  LED Fuse Status Indicators
  • Table 3: Content of Displays of the DCM Drive
  • Table 4: Content of Scopes and Displayed Waveforms
  • Table 5: Content of Scopes and Displayed Waveforms of the DCM Drive
  • Table 6: Parameters of the DC Motor Under Test
  • Table 7: DCM and MUT Nameplate Ratings
  • Table 8: Single-phase Two-level Inverter Nameplate Ratings
  • Table 9: Test Bench Mechanical Parameters
  • Table 10: Speed and Voltage Values for the Determination of Back-emf Constant
  • Table 11: Speed, Voltage, and Current Values for the Determination of Ra
  • Table 12: Speed, Current, and Torque Values for Friction Parameters’ Determination

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter