HIL2GO-100 - I/O Group 2, Section A (CH 00-15) - Analog Inputs (OP5342)

Connected I/O module is OP5342 - 16 analog input, 2 MSPS

Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.
Before connecting the cables, make sure that the voltages or other electrical specifications are compatible with OPAL-RT DB37 specifications of I/O module OP5342.

Connector P1 Group 1- Section A - Channel 00 to 15 (Connector P2 underneath is not used)
DB37F Pin	Assignment	DB37F Pin	Assignment
1	+AIN00	20	-AIN00
2	+AIN01	21	-AIN01
3	+AIN02	22	-AIN02
4	+AIN03	23	-AIN03
5	+AIN04	24	-AIN04
6	+AIN05	25	-AIN05
7	+AIN06	26	-AIN06
8	+AIN07	27	-AIN07
9	+AIN08	28	-AIN08
10	+AIN09	29	-AIN09
11	+AIN10	30	-AIN10
12	+AIN11	31	-AIN11
13	+AIN12	32	-AIN12
14	+AIN13	33	-AIN13
15	+AIN14	34	-AIN14
16	+AIN15	35	-AIN15
17	+12 V*	36	GND
18	Not used	37	Not used
19	Not used

* Internally provided by the simulator. Non-isolated, limited to 400 mA.

ANALOGIN BLOCK PARAMETERS
Parameters	CH00-07	CH08-15
Controller Name	'OP4512 OpCtrl'
DataOut Port Number	7	8
Number of channels	8	8
Sample Time (s)	0	0

Add label