Documentation Home Page ◇ Power Electronics Add-On for NI VeriStand Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
5.10 Controlling and Monitoring the Simulation
- Sylvain Ménard
- Pierre-Luc Renault (Unlicensed)
- Myriam Desranleau
Owned by Sylvain Ménard
Set the Speed Setpoint to a value between 0 and 2500RPM and observe the resulting voltage and current waveforms as the machine runs.
In this example, the Speed Setpoint parameter must be set to a positive value. This is a limitation of the example control model used in the project; it is not a limitation of the 6-Phase PMSM VDQ machine model.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter