Page Content

Known Issues & Limitations

• Multi-user sessions are not supported.

• OPAL-RT Dashboards only works with 64-bits targets (only OPAL-RTLinux 3 or Windows targets, not Red Hat nor CentOS).

• No undo-redo.

• No user authentication/session management.

• Signal values can be visualized in Panels only, not in Tables.

• Tab Group widgets are not supported by the Python API and the copy-paste. Using more than 10 tabs with multiple widgets may lead to high UI latency.

• Depending on computer performance and CPU allocation, using more than 16 graph widgets may lead to high UI latency.

RT-LAB 2024.4

• Boolean data points are not visible in Dashboards.

• Dashboards does not support block or parameter with accent.

HYPERSIM 2024.4

• HYPERSIM unit system is not available in Dashboards.

• Equality of multidimensional parameters in HYPERSIM cannot be enforced in Dashboards.

• Dashboards may hide HYPERSIM pop-up error message.

RT-LAB 2024.3 (Additional limitation)

• For projects with more than 30k data points, it is recommended to use the Python API to create panels and connect data points.

• Launching multiple models at the same time may leads to data not appearing in graph widgets if data point share the same name.

HYPERSIM 2024.3 (Additional limitation)

• For projects with more than 30k data points, it is recommended to use the Python API to create panels and connect data points.

• If Analyze is done and the project is then closed without being saved at least once, connections between data points of HYPERSIM model with sub-circuits and widgets may be lost.

RT-LAB 2024.2 (Additional limitation)

• Launching Graph Widgets on multiple Target is not supported.

• The use of Dashboards in RT-LAB and HYPERSIM at the same time is not supported.

HYPERSIM 2024.2 (Additional limitation)

• Launching Graph Widgets on multiple Target is not supported.

• The use of Dashboards in RT-LAB and HYPERSIM at the same time is not supported.

RT-LAB 2024.1 (Additional limitation)

• Error message “Dashboards seams unavailable” may appears at start of RT-LAB if Dashboards installation is not successful. An independent reinstallation of Dashboard is needed.

• Launching multiple models at the same time may leads to data not appearing in graph widgets. To solve the issue, start the models sequentially.

HYPERSIM 2024.1 (Additional limitation)

• Error message “Dashboards seams unavailable” may appears at start of HYPERSIM if Dashboards installation is not successful. An independent reinstallation of Dashboard is needed.

RT-LAB 2023.3 (Additional limitation)

• Multi-dimensional parameters and signals not supported in Panels;

HYPERSIM 2023.3 (Additional limitation)

• Multi-dimensional parameters and signals not supported in Panels;

• Removing a sensor from the HYPERSIM sensors list does not remove it from the Dashboards list. If a connection exists between a widget and a removed sensor, the HYPERSIM simulation will not start until the connection is removed.

• When a simulation started in Dashboards fails to launch in HYPERSIM, an internal message is shown in Dashboards and the model status can be desynchronized. Use the fetch button to resynchronize.

• In the graph widget, visual horizontal shifting of value happens when:

  • The trigger condition is set to rising edge, the trigger level is positive and the X position is at 0%.

  • The trigger condition is set to falling edge, the trigger level is negative and the X position is at 0%.

  
  Setting the X position at any other value stops the horizontal shifting.

RT-LAB 2023.2 (Additional limitation)

• Renaming Simulink models in RT-LAB may result in synchronization issues in Dashboards.

• Once Opal One v1.2 is installed (RT-LAB or HYPERSIM 2023.2), reinstalling Opal One v1.0 (RT-LAB or HYPERSIM 2023.1) might break the compatibilities of Opal One v1.2. Reinstall Opal One v1.2 to solve the issue.

HYPERSIM 2023.2 (Additional limitation)

• Once Opal One v1.2 is installed (RT-LAB or HYPERSIM 2023.2), reinstalling Opal One v1.0 (RT-LAB or HYPERSIM 2023.1) might break the compatibilities of Opal One v1.2. Reinstall Opal One v1.2 to solve the issue.

RT-LAB 2023.1 (Additional limitation)

• No copy-cut-paste;

HYPERSIM 2023.1 (Additional limitations)

• No copy-cut-paste;

• Opening Dashboards for more than one HYPERSIM model may result in synchronization issues;