Block

Mask

N/A.

Controller Name	Each functionality block such as the OpFcnAnalogIn block must refer to an OpCtrl block such as the OP5130 Ctrl block, that will manage the data transfer with the IO board. The binding between OpFcn and OpCtrl blocks is performed via the use of the Controller name that each OpCtrl block uniquely defines. This binding is checked during the initialization phase of the model. If no OpCtrl block is found that defines the same Controller Name as this OpFcnAnalogIn block, the OpFcnAnalogIn block is simply disabled and returns 0s.
Selection of Functionalities
Activity State

DOut:

This block has no outputs.