Documentation Home Page Courseware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

List of Figures

  • Figure 1: Single-Phase Diode Bridge Rectifier
  • Figure 2: Three-Phase Diode Bridge Rectifier
  • Figure 3: Three-Phase Thyristor Bridge Rectifier
  • Figure 4: Single-Phase Diode Bridge Rectifier With Resistive Load 
  • Figure 5: Positive Cycle of the Single-Phase Diode Bridge Rectifier
  • Figure 6Negative Cycle of the Single-Phase Diode Bridge Rectifier
  • Figure 7: Single-Phase Diode Bridge Rectifier With Smoothing Capacitor
  • Figure 8: Start-Up Panel of the Single-Phase Diode Bridge Rectifier Laboratory
  • Figure 9: Changing the Resistive Load Value
  • Figure 10: Changing the Inductive Load Value
  • Figure 11: Single-Phase Diode Bridge Rectifier Panel with a Resistive Load of 16.5 ohms
  • Figure 12: Single-Phase Diode Bridge Rectifier Panel with R=16.5 ohms and C= 470 µF
  • Figure 13: Single-Phase Diode Bridge Rectifier Panel with an Inductive Load (R=25 ohms, L=40 mH)
  • Figure 14: Three-phase Diode Bridge Rectifier With Smoothing Capacitor
  • Figure 15: Start-Up Panel of the Three-Phase Diode Bridge Rectifier Laboratory
  • Figure 16: Three-Phase Diode Bridge Rectifier Panel with a Resistive Load of 16.5 ohms
  • Figure 17: Three-Phase Diode Bridge Rectifier Panel with R=16.5 ohms and C= 470 µF
  • Figure 18: Three-Phase Diode Bridge Rectifier Panel with an Inductive Load (R=25 ohms, L=40 mH)
  • Figure 19: Three-phase Thyristor-based Rectifier
  • Figure 20: Waveforms of voltages and thyristor firing signals for a firing α angle set to 0°
  • Figure 21: Start-Up Panel of the Three-Phase Thyristor Bridge Rectifier Laboratory
  • Figure 22: Three-Phase Thyristor Bridge Rectifier Panel with an AC-source amplitude of 140V
  • Figure 23: Three-Phase Thyristor Bridge Rectifier Panel with R = 25 ohms, L = 40 mH

List of Tables

  • Table 1: Control Parameters of the Single-Phase Diode Bridge Rectifier
  • Table 2: Control and Switch Buttons
  • Table 3: Content of Scopes and Displayed Waveforms
  • Table 4: Effect of Varying Resistive Load
  • Table 5: Case 1- Varying Resistive Load With Smoothing Capacitor
  • Table 6: Case 2- Varying Resistive Load With Smoothing Capacitor
  • Table 7: Case 3- Varying Resistive Load With Smoothing Capacitor
  • Table 8: Effect of Varying Inductive Load
  • Table 9: Content of Scopes and Displayed Waveforms in Three-Phase Diode-based Rectifier
  • Table 10: Impact of Varying Resistive Load
  • Table 11: Case 1- Effect of varying Resistive Load With Smoothing Capacitor
  • Table 12: Case 2- Effect of varying Resistive Load With Smoothing Capacitor
  • Table 13: Case 3- Effect of varying Resistive Load With Smoothing Capacitor
  • Table 14: Impact of Varying Inductive Load
  • Table 15: Order of Conducting Thyristors for a Firing Angle of 0° when the Load is Resistive
  • Table 16: Control Parameters of the Three-Phase Thyristor Bridge Rectifier
  • Table 17: Control Buttons and LED Fuse Indicators
  • Table 18: Content of Scopes and Displayed Waveforms in Three-Phase Thyristor Bridde Rectifier
  • Table 19: Content of Displays
  • Table 20: Effect of Varying Fyring Angle
  • Table 21: Effect of Varying Fyring Angle with R=25 ohms
  • Table 22: Effect of Varying Fyring Angle (indutive load scenario)
  • Table 23: Effect of Varying Inductance
  • No labels